Specifications:

• Ultrasonic remote-control trigger, used for camera synchronously to touch off the studio lamp, consists of two parts: signal transmitter and receiver, which operates by wireless remote-control
• The advanced circuit of signal transmitter adopting launches out FM's radio signal. The circuit layout is designed with sleep function, thus the power consumption cost extremely low; one section of battery can be available for more than one year in sleep status and continuous touch-off reaches ten thousand times. Touch-off current remains only 0.01 milliamp-ere and will not create a bit harm to the flash contact of camera shutter
• The receiver, using AC for power supply, is controlled by FM's radio signal to decipher the work
• The strong anti-dryness, extremely low power consumption and sensitive reaction satisfy various types of camera shutters in the use of synchronous flash
• Power Supply of the Signal Transmitter: 23A 12V mini-battery (in the transmitter)
• Power Supply of the Receiver: AC110V~230V, 50/60Hz
• Cable Length: 420mm / 16.5in
• Size: 104 x 65 x 32mm / 4.1 x 2.6 x 1.3in(L x W x H)

Usage:

• Unplug the AC power pin from the studio lamp and insert it into the AC input jack of the receiver
• Insert AC output pin of the receiver into the power input jack of the studio lamp
• Insert the trigger output pin of the receiver into the control jack of the studio lamp(socket for synchronous line)
• Connect the AC power supply and the DC power indicator of the the receiver will turn green
• Press down the testing knob of the transmitter,the trigger signal indicator of the receiver will turn red and simultaneously the studio lamp will flash to work
• Insert the Hot Shoe of the transmitter into the Hot Shoe jack of the camera for normal use
• If the camera has no hot shoe jack,insert one end of the synchronous line into the socker for synchronous line of the transmitter and the other end into the synchronous jack of the camera

NOTE:

• The power supply is wanted to be consistent with the body
• Please change new battery upon running out, or will appear flash leak
• Avoid falling or colliding with the hard thing
• If there is other wave to interfere at the place, probably can appear to flash by mistake
• This receive the machine power supply outputs biggest power of line as 250V 4As
• Please use the power supply with reliable grounding and should power off if not in use
• Non professionals are prohibited to dismantle it due to high voltage
• Never user it in moist, cold or high-temperature environment

Package Included:

• 1 x Transmitter
• 1 x Receiver
• 1 x Input Converter
• 1 x Sync Cord
• 1 x User's Manual